Journal Publications(2022-2015)
S.No
|
Name
|
Title
|
Journal Name
|
Vol, page no, Year
|
1
|
Aditya Sharma
|
Fault diagnosis of bearings using recurrences and AI techniques
|
ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
|
DOI: 10.1115/1.4053773
|
2
|
Pushpendra Yadav, Ankit Sahai, Rahul Swarup Sharma
|
Flexural Strength and Surface Profiling of Carbon-Based PLA Parts by Additive Manufacturing
|
Journal of Institution of Engineers (India):Series C
|
102, 921-931, 2021
|
3
|
Pushpendra Yadav, Ankit Sahai, Rahul Swarup Sharma
|
Strength and Surface Characteristics of FDM-Based 3D Printed PLA Parts for Multiple Infill Design Patterns,
|
Journal of Institution of Engineers (India):Series C
|
102, 197-207, 2021
|
4
|
Nitin Upadhyay, Aditya Sharma, Agnivesh Kumar Sinha and Surendra Kumar Chourasiya
|
Wavelet time scattering features for the bearing defects classification
|
Design Engineering
|
9,2905-2913, 2021
|
5
|
S Singh, P Singhal, G Kumar Singh, S Srivastava, A Yadav, M Dixit
|
Effect of Logistics Backpack Load on Lower Limb Muscles Activation in E-Commerce Workers
|
Turkish Journal of Physiotherapy and Rehabilitation
|
32 (3), 3946-3952, 2021
|
6
|
Arup Chandra saha, Rajesh Kumar, et al.
|
Analytical modelling of a radiant cooling system for thermal performance analysis
|
Materials Today: Proceedings
|
47, 2474-2480, 2021
|
7
|
Anurag Gupta, Kumar Ratnakar, D. Ganeshwar Rao, Ajay Kumar Sharma;
|
Studies on utilization of different preheated straight vegetables oil in a CI engine
|
IOP Conference Series: Materials Science and Engineering
|
1116 (2021) 012057; doi:10.1088/1757-899X/1116/1/012057
|
8
|
Anurag Gupta, Kumar Ratnakar, D. Ganeshwar Rao, Ajay Kumar Sharma;
|
Feasibility Study on Solid Waste to Useful Energy
|
IOP Conference Series: Materials Science and Engineering
|
1116 (2021) 012059; doi:10.1088/1757-899X/1116/1/012059
|
9
|
P. Yadav, D. Angajala, I. Singhal, A. Sahai, R.S. Sharma
|
Evaluating mechanical strength of three dimensional printed PLA parts by free form fabrication
|
Materials Today: Proceedings
|
46(19), 9498-9502, 2020
|
10
|
M Kumar, S Srivastava
|
Electromyographic analysis of VMO and VL across straight leg raise, short arc quad, medial tibial rotation and hip adduction in normal individuals
|
Work
|
65 (1), 153-159, 2020
|
11
|
GK Singh, S Srivastava
|
Grip strength of occupational workers in relation with carpal tunnel syndrome and individual factors
|
International Journal of Occupational Safety and Ergonomics
|
26 (2), 296-302, 2020
|
12
|
Aditya Sharma, M. Amarnath, P.K. Kankar
|
Nonlinear dynamic analysis of defective rolling element bearing using Higuchi's fractal dimension
|
Sādhanā
|
44(4), 2019, pp. 01-29
|
13
|
Aditya Sharma, Sharad Bhardwaj and P.K. Kankar
|
Fault diagnosis of rolling element bearings using fractional linear prediction and AI techniques
|
Life Cycle Reliability and Safety Engineering
|
8(1), 2019, pp. 11-19
|
14
|
A. Suri, R. Setia, K.H. Raj
|
Pre and post annealing effect of annealing of dissimilar friction stir welding of Al 5083/6063 using new pedal shape pin tool
|
IOP Journal of physics, conference series
|
1240 (1), 012167, 2019
|
15
|
G Kumar Singh, S Srivastava, M Kumar, S Ratnakar
|
Effects of selected rehabilitative exercises on external rotator muscles and trapezius muscles of masonry workers
|
Work
|
60 (3), 437-444, 2018
|
16
|
GK Singh, S Srivastava
|
Preferential strengthening of VMO muscle during selected biomechanical rehabilitative exercises of automotive workers with patellofemoral pain syndrome
|
Work
|
60 (1), 135-141, 2018
|
17
|
M Kumar, S Srivastava, VS Das
|
Electromyographic analysis of selected shoulder muscles during rehabilitation exercises
|
Journal of back and musculoskeletal rehabilitation
|
31 (5), 947-954, 2018
|
18
|
A. Dayal, Ankit Sahai, K. Hans Raj, Rahul Swarup Sharma
|
Comprehensive study of the effect of process parameters in equal channel angular pressing,
|
Indian Journal of Engineering and Material Sciences
|
25, 113-121, 2018
|
19
|
Rahul Swarup Sharma, Ishant Singhal, Shivam Gupta
|
Innovative Training Framework for Additive Manufacturing Ecosystem to Accelerate Adoption of Three-Dimensional Printing Technologies
|
3D Printing & Additive Manufacturing
|
5(2), 170-179, 2018
|
20
|
Atul Dayal, K Hans Raj, Rahul Swarup Sharma
|
Investigation of ECAP process for enhancing process efficiency
|
Materials Today: Proceedings
|
5(1), 878-884, 2018
|
21
|
Atul Dayal, K Hans Raj, Rahul Swarup Sharma
|
ECAP Die Design for Minimising Corner Gap
|
Materials Today: Proceedings
|
5(1), 1686-1690, 2018
|
22
|
Rajesh Kumar and R.P. Gakkhar
|
Influence of Nozzle Opening Pressure on Combustion, Performance and Emission analysis of waste cooking oil Biodiesel Fueled Diesel Engine
|
International Journal of Renewable Energy Technology
|
vol. 9, 244-259, 2018
|
23
|
Aditya Sharma, M. Amarnath, P.K. Kankar
|
Life assessment and health monitoring of rolling element bearings: an experimental study
|
Life Cycle Reliability and Safety Engineering
|
7(2), 2018, pp. 97-114
|
24
|
Aditya Sharma, Nitin Upadhyay, P.K. Kankar, M. Amarnath
|
Nonlinear dynamic investigations on rolling element bearings: a review
|
Advances in Mechanical Engineering
|
10(3), 2018, pp. 1-15
|
25
|
Aditya Sharma, M. Amarnath, P.K. Kankar
|
Use of feature ranking techniques for defect severity estimation of rolling element bearing
|
International Journal of Acoustics and Vibration
|
23(1), 2018, pp. 49-56
|
26
|
Ankit Sahai, K. HansRaj, NK Gupta
|
Mechanical Behaviour and Surface Profile Analysis of Al6061 alloy processed by Equal Channel Angular Extrusion
|
Procedia Engineering (Elsevier)
|
173, 956-963, 2017
|
27
|
A. Suri, A. Sahai, KH Raj, NK Gupta
|
Impact and tensile testing of Al 2024 alloy processed with friction stir welding
|
Procedia Engineering, Elsevier
|
173, 679-685, 2017
|
28
|
P BHATNAGAR, S NIGAM, P PRASHANT, R CAPRIHAN
|
Desirable Traits of a Conscious Leader: An Empirical Survey
|
The Delhi University Journal of the Humanities and the Social Sciences
|
3, 71-91, 2016
|
29
|
Rahul Swarup Sharma
|
Technology enabled learning of metal forming processes for engineering graduates using virtual simulation lab
|
International Journal of Mechanical Engineering Education
|
44(2), 133-147, 2016
|
30
|
Aditya Sharma, M. Amarnath, P.K. Kankar
|
Novel ensemble techniques for classification of rolling element bearing faults
|
Journal of the Brazilian Society of Mechanical Sciences and Engineering
|
39(3), 2016, pp. 709-724
|
31
|
Aditya Sharma, M. Amarnath, P.K. Kankar
|
Feature extraction and fault severity classification in ball bearings
|
Journal of Vibration and Control
|
22(1), 2016, pp. 176-192
|
32
|
Das, G., and Singh, R.
|
Modeling of LDO-fired Rotary Furnace Parameters using Adaptive Network-based Fuzzy Inference System
|
The International Journal of Engineering and Science
|
4(8), 38–43, 2015
|
33
|
Das, G., and Das, P.
|
Cutting Forces in Drilling Operation: Measurement and Modeling for Medium-scale Manufacturing Firms
|
International Journal of Computer Applications
|
121(8), 11–17, 2015
|
34
|
Das, G., and Das, P.
|
Neuro-Genetic Optimization of LDO-fired Rotary Furnace Parameters for the Production of Quality Castings
|
International Journal of Engineering Research and Development
|
11(6), 30–37, 2015
|
35
|
BK Pathak, S Srivastava
|
Effects of Project Uncertainties on Nonlinear Time-Cost Tradeoff Profile
|
Iranian Journal of Fuzzy Systems
|
12 (4), 79-100, 2015
|
36
|
YK Anand, S Srivastava, K Srivastava
|
Risk of occupational health hazard: Assessment using CDSwFR and minimization using EMOwJCS
|
A Journal of Prevention, Assessment and Rehabilitation
|
51 (3), 621-632, 2015
|
Conference Publications (2022-2015)
S.No
|
Name
|
Title
|
Conference Name
|
Vol, page no, Year
|
1.
|
Dheeraj A Angazala, Ankit Sahai, Rahul Swarup Sharma
|
Sustainable and Affordable Lower Limb Prosthetics for Health Care Systems, Systems for Sustainable Healthcare Habitats
|
44th National Systems Conference, DEI Agra
|
2021
|
2.
|
Das, G., Singh, G., and Zindani, D.
|
Decision Support System for Electric Discharge Machined AA6061/Al2O3/10p Metal Matrix Composite
|
International Conference on Engineering Materials Metallurgy and Manufacturing held at SSNCOE, Chennai
|
December 16-17, 2021
Paper ID 145
|
3.
|
Singh, S., and Das, G.
|
Automatic Emergency Braking System
|
International Conference on Frontiers of Science & Technology held at KIET Ghaziabad
|
August 13-14, 2021
Paper ID 42
|
4.
|
M Yadav, GK Singh, A Yadav, S Srivastava, G Gupta
|
Pulmonary Function Analysis of a Simple Crossed Legs Sitting Posture
|
Ergonomics for Improved Productivity: Proceedings of HWWE
|
2017, 1019-1025, 2021
|
5.
|
Jyoti, P., and Das, G.
|
An overview of the airbag system and its defects
|
International Conference on Frontiers of Science & Technology held at KIET Ghaziabad
|
August 13-14, 2021
Paper ID 36
|
6.
|
Das, P., and Das, G.
|
Performance Assessment of Electric Discharge Machining on AA6061/Al2O3/10p Metal Matrix Composite
|
International Conference on Progressive Research in Industrial & Mechanical Engineering held at NIT Patna
|
August 5–7, 2021
Paper ID 334
|
7.
|
Kushwaha, A., and Das, G.
|
A novel technique to prevent COVID-19 transmission in temples
|
International Conference on Recent Developments on Materials, Reliability, Safety, and Environmental issues held at NIT Jalandhar
|
June 25-27, 2021
Paper ID 88
|
8.
|
Singh, R., and Das, G.
|
Integration of tool management issues in automated manufacturing systems
|
National Conference on 2nd Innovative Product Design and Intelligent Manufacturing Systems held at NIT Rourkela
|
February 12–13, 2021
Paper ID 127
|
9.
|
Gupta, Anurag; Ratnakar, Kumar; Rao, D. Ganeshwar; Sharma, Ajay Kumar
|
Feasibility Study on Solid Waste to useful Energy
|
Online International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET-2020) at GLA University, Mathura, Uttar Pradesh
|
December 18-19, 2020.
|
10.
|
Gupta, Anurag; Ratnakar, Kumar; Rao, D. Ganeshwar; Sharma, Ajay Kumar
|
Studies on utilization of different preheated straight vegetables oil in a CI engine
|
Online International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET-2020) at GLA University, Mathura, Uttar Pradesh
|
December 18-19, 2020.
|
11.
|
R Caprihan, J Slomp, G Srivastava, K Agarwal
|
A Quantum Particle Swarm Optimization Approach for the Design of Virtual Manufacturing Cells
|
IEEE International Conference on Industrial Engineering and Engineering Management
|
2019
|
12.
|
Pushpendra Yadav, Ishant Singhal, Dheeraj A Angazala, Ankit Sahai, Rahul Swarup Sharma
|
Evaluating Mechanical Strength of Three Dimensional PLA printed parts by Free Form Fabrication.
|
International Mechanical Engineering Congress (IMEC-2019), NIT Trichy
|
2019
|
13.
|
Pushpendra Yadav, Ankit Sahai, Rahul Swarup Sharma
|
Experimental Investigations for Effects of Raster Orientation and Infill Design on Mechanical Properties in Additive Manufacturing by Fused Deposition Modelling.
|
ICCM, IIT Guwahati
|
2019
|
14.
|
Gupta, Anurag; Ratnakar, Kumar; Rao, D. Ganeshwar
|
Performance and Emission Characteristics of Diesel Engine Fuelled with preheated straight vegetable oil
|
International Conference at National Institute of Technology, Tiruchirappalli, Tamil Nadu
|
2019
|
15.
|
Chaturvedi, Himanshu; Gupta, Anurag; Ratnakar, Kumar; Rao, D. Ganeshwar
|
Potential of non-edible straight vegetable oil (SVO) as a substitute fuel for diesel engine
|
International Conference at NIT Kurukshetra, Haryana
|
2019
|
16.
|
Rahul Swarup Sharma and Ankit Sahai
|
Complementing Learning of Metal Forming Processes via Virtual Simulation Lab.
|
7th International and 28th All India Manufacturing Technology, Design and Research (AIMTDR) Anna University, Chennai.
|
2018
|
17.
|
Ankit Sahai, Pushpendra Yadav, Rahul Swarup Sharma, N K Gupta
|
Intensifying Hands-On Learning, Exploration and Inventorship by Designing Fused Deposition Modeling Three Dimensional Printers
|
IUTAM Symposium, AMT-2018, Moscow, Russia
|
2018
|
18.
|
Pushpendra Yadav, Shashank Kapoor, Ishant Singhal, Ankit Sahai, Rahul Swarup Sharma
|
Effect of build orientation and infill density on mechanical properties of 3D printed parts by Fused Deposition Modeling.
|
34thNational Convention of Mechanical Engineers, Institution of Engineers, New Delhi
|
2018
|
19.
|
Shashank Garg, Ishant Kumar, Rahul Swarup Sharma, Ankit Sahai
|
Experimentation of different aerofoil profiles in Wind Tunnel and its aerodynamic performance.
|
International Conference on Frontiers in Engineering and Technology, NIT Trichy
|
2018
|
20.
|
Manoj Kumar, R.P. Saini
|
Energy and Exergy Analysis for Heliostat Based Solar Thermal Power Plants
|
2nd IEEE International conference on power electronics, Intelligent control and Energy Systems
|
2018
|
21.
|
Subho Upadhyay, Akash Singh Chaudhary, Manoj Kumar, M.P. Sharma
|
Evaluating the Shortest Path for Laying Distribution Network in a Hilly Area
|
8th India International Conference on Power Electronics (IICPE)” organized at Malaviya National Institute of Technology (MNIT), Jaipur
|
2018
|
22.
|
M. Chowdhary, R. Singh, S. Agrawal, A.Kumar, N. Prasad, A. Suri, A. Sahai
|
Hardness Variation on Longitudinal and Transverse Sections of Al 2024 Specimen Processed by Friction Stir Processing
|
National Conference on Mechanical Engineering Ideas, Innovations and Initiatives (NCMEI3), at Aligarh Muslim University (AMU
|
2016
|
23.
|
A.Dayal, R S Sharma, K. HansRaj
|
ECAP Die Design for Minimising Corner Gap
|
International Conference on Processing of Materials, Minerals and Energy, Ongole, A.P., India
|
2016
|
24.
|
A.Dayal, K. HansRaj, R S Sharma,
|
Investigation of ECAP process for enhancing process efficiency
|
International Conference on Processing of Materials, Minerals and Energy, Ongole, A.P., India
|
2016
|
25.
|
A. Swarnkar, R. Kumar, A. Suri, A. Sahai,
|
A review on friction stir welding an environmt friendly welding technique
|
IEEE region 10
|
pp1-4, 2016
|
26.
|
Ankit Sahai, K. HansRaj
|
Processing of Al Alloy through Severe Plastic Deformation: Microstructure and Mechanical Properties
|
Indian Conference on Applied Mechanics, IIT Delhi
|
2015
|
27.
|
Marni Nirmal, Ankit Sahai, Ashish Rajput, R S Sharma, K. HansRaj
|
Hardness and Microstructure of of Al6061 Alloy after Severe Plastic Deformation
|
International conference on Mechanical, Material, Aeronautical and Nanotechnology (MIANT), JNU, New Delhi
|
2015
|
28.
|
Rajesh kumar and R P Gakkhar
|
Influence of Injection Timing on Combustion, Performance and Emission Analysis of Small CI Engine Fueled with Biodiesel
|
5th International Conference on Advances in Energy Research, Indian Institute of Technology, Bombay, India
|
2015
|
Books/Book Chapters Published(2022-2015)
S.No
|
Name
|
Title
|
Book Name
|
Vol, page no, Year
|
1.
|
D. Angajala, A. Sahai, R.S. Sharma
|
Re-engineering infill density system for 3D printing”
|
Advances in Systems Engineering
|
293-298, 2021
|
2.
|
Yadav M., Singh G.K., Yadav A., Srivastava S., Gupta G.
|
Pulmonary Function Analysis of a Simple Crossed Legs Sitting Posture
|
Ergonomics for Improved Productivity. Design Science and Innovation. Springer, Singapore. https://doi.org/10.1007/978-981-15-9054-2_119
|
1019-1025, 2021
|
3.
|
Yadav A., Singh G.K., Srivastava S.
|
Electromyographic Analysis of Low Back Muscles of Occupational Workers: A Review.
|
Ergonomics for Improved Productivity. Design Science and Innovation. Springer, Singapore. https://doi.org/10.1007/978-981-15-9054-2_32
|
281-286, 2021
|
4.
|
Singh P., Srivastava S., Thakur N.S.
|
Redesigning Agricultural Tools Using Anthropometry of Male Agricultural Workers of Dayalbagh Region, Agra, India.
|
Ergonomics for Improved Productivity. Design Science and Innovation. Springer, Singapore. https://doi.org/10.1007/978-981-15-9054-2_19
|
173-180, 2021
|
5.
|
Singh P., Srivastava S., Thakur N.S.
|
Design of Land Leveller Height Measuring Physiological and Psychophysical Parameters.
|
Ergonomics for Improved Productivity. Design Science and Innovation. Springer, Singapore. https://doi.org/10.1007/978-981-15-9054-2_21
|
189-198, 2021
|
6.
|
Pushpendra Yadav, Ishant Singhal, Bobby Tyagi, Ankit Sahai, Rahul Swarup Sharma
|
Intensifying Hands-on Learning and Experimentation of Fused Deposition Modeling Three-Dimensional Printers
|
Advances in Additive Manufacturing and Joining
|
309-317, 2020
|
7.
|
Sharad Bhardwaj, Aditya Sharma, Ashish Malik, K.L.A. Khan
|
Performance assessment of a dual fuel engine operated with agricultural wastes and diesel
|
Reliability and Risk Assessment in Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore
|
pp. 231-240, 2020
|
8.
|
Aditya Sharma, Pavan Kumar Kankar and M. Amarnath
|
Investigations on nonlinearity for health monitoring of rotor bearing system, Reliability and Risk Assessment in Engineering
|
Reliability and Risk Assessment in Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore
|
pp. 241-252, 2020
|
9.
|
Pushpendra Yadav, Ankit Sahai, Rahul Swarup Sharma
|
Experimental Investigations for Effects of Raster Orientation and Infill Design on Mechanical Properties in Additive Manufacturing by Fused Deposition Modelling
|
Advances in Computational Methods in Manufacturing
|
415-424, 2019
|
10.
|
Atul Dayal, Ankit Sahai, K Hansraj, Rahul S Sharma
|
Three Turn ECAP Processing of AA6061 Alloy: Microstructure and Mechanical Properties
|
Advances in Micro and Nano Manufacturing and Surface Engineering
|
461-472, 2019
|
11.
|
Ankit Sahai, Atul Dayal, Rahul S Sharma
|
Towards Extending ECAP Technology from Lab Scale to Manufacturing by Enhanced Multipass Continuous ECAP Process
|
Advances in Micro and Nano Manufacturing and Surface Engineering
|
663-671, 2019
|
12.
|
Rajesh Kumar and R P Gakkhar
|
Experimental Investigation for Performance Optimization of Biodiesel fueled Diesel Engine using Taguchi-Gray relational analysis
|
Optimization Techniques for Problem Solving in Uncertainty
|
2018
|
13.
|
Aditya Sharma, M. Amarnath, P.K. Kankar
|
Effect of unbalanced rotor on the dynamics of cylindrical roller bearings
|
Mechanisms and Machine Science, Springer International Publishing AG Switzerland
|
Vol. 21, pp. 1653-1663, 2015
|
|